A2.GO Update 10
Where we last left off our wagon update, the motor was in, and mostly hooked up. Now we needed to hook up the remaining elements, mainly the front end, intercoolers, […]
Tag Archives: The Build
Solo-Werks Coilover Review P3
In 2014 as part of our original Avant resto project, we upgraded the suspension with new control arms and a set of Solo-Werks coilovers. We were excited to try […]
Brake Rebuild
Today we are talking about brakes, more specifically, how you can rebuild/restore them for a few dollars and some hard work. We will be focused on disc brake setups, as […]
A2.GO Update 9
In this update, we finally get the engine in! That’s right, the time has come to get the engine in its place. It’s worth noting that up until this point, […]
A2.GO Update 8
When we last left off on the Avant Resto Project, we had just completed the clutch and valve cover seals. Today we are moving a few more steps closer to […]
A2.GO Update 7
In this update we tackle the valve covers and the seals for them. Our Avant resto project has come a long way from its origins as a beat down, slow […]
A2.GO Update 5
In this update for the Avant Resto Project, we’ll cover the prep for our 01e six-speed transmission and the slave cylinder installation. While the six-speed from our donor car came […]
A2.GO Update 4
Update 4 is a large one, with lots of small stuff happening since we gave our last update. Since it’s been a while, we figured a quick recap would be the best way […]
A2.GO Update 3
It’s been a while since we have posted an update on our Avant Resto Project, however we have some progress to report. As our project builds up steam, we will […]
A2.GO Update 1
For those of you just joining us now, a quick refresh is in order. A few weeks ago we announced that we were starting the Avant 2.go project. The new […]
CleanAudi 